Technical data:
Areas of application |
Large industrial roofs Fast installation |
Description |
Thermal insulation panels for flat roofs With aluminum shield on both sides |
Version |
Straight plates with teeth
|
Board size |
2,400 x 1,200 mm (built-in size: 2,385 x 1,185 mm) |
Fire performance |
Reaction class E according to EN 13501-1 |
Compressive stress |
≥120kPa(≥0.12 N/mm2) |
Thermal conductivity (EU) |
0.022 (W/m2.K) |
PIR index |
>250 |
Thickness of the insulation board
16 other products in the same category:
SGN 101 snow hook is suitable for flat roofs
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard color - at an...
0.97€
Tax included
The SGN 030 snow hook is suitable for the Nelskamp Nibra G10.
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
1.06€
Tax included
Technical data:
Top cover layer
Aluminum; with TL 22 mm laminated wood panel
Lower cover layer
Aluminum
Edge plate
tongue and groove, perimeter
Length
1800 mm (outside dimension)1780 mm (inside dimension)
Width
1,200 mm (outside...
92.67€
Tax included
Protisněhový hák SGN 004 je vhodný pro Koramic Romanska L25
Materiál:
Pozinkovaný ocelový plech o tloušťce 1,2 mm + 0,1 mm natřený polyesterovou barvou, která je odolná proti korozi a je k dispozici ve čtyřech různých barvách (atypická barva –...
1.06€
Tax included
Vertical snow fence strut type DB/DC for ladders with a height of 200 mm.
The "DB/DC" snow fence strut is a key component for installing a snow fence on concrete or ceramic tongue-and-groove tile roofs. This product is designed to ensure a...
5.63€
Tax included
The VELUX GGL 3068 roof window is an excellent choice for those looking for a combination of top quality and modern design. This window is designed not only to provide the maximum amount of natural light, but also to contribute to energy savings...
437.84€
Tax included
Ventilation chimney H275 DN75 TPE (neutral) with a chimney cover is designed for ventilation of the roofing of flat roofs, whose insulation layer is made of asphalt strips. On the underside of the flange there are channels for evaporation of water...
12.00€
Tax included
bnnbnb
546.36€
Tax included
SGN 021 snow hook is suitable for Tondach Samba (Rumba).
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
1.06€
Tax included
Technical data:
Top layer
Aluminum; with textile waterproof top layer
Bottom cover layer
Aluminum
Edge plate
Tongue and groove, around the perimeter
Length
1800 mm (outside dimension)1780 mm (inside dimension)
Width
1,200 mm...
35.77€
Tax included
Sun tunnel lighting - LED lighting carrier Velux ZTL 014 - for sun tunnels with a tube diameter of 35 cm.
79.76€
Tax included
The strut is suitable for direct installation on roofing. The profiled base determines the use of the product for installation on battens under concrete or plain tile roofing on felt roofing.
To ensure safe installation, attention should be...
5.63€
Tax included
Technical data:
Areas of application
Large and small areas, convenient format
Description
Thermal insulation for flat roofs, double-sided mineral matting
Version
Straight boards, straight edge (M)Straight boards with tooth (MF)
Board...
62.90€
Tax included
SGN 013 snow hook is suitable for Tondach Polka, Jirčanka
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - for an...
1.06€
Tax included