Technical data:
Areas of application |
Large industrial roofs Fast installation |
Description |
Thermal insulation panels for flat roofs With aluminum shield on both sides |
Version |
Straight plates with teeth
|
Board size |
2,400 x 1,200 mm (built-in size: 2,385 x 1,185 mm) |
Fire performance |
Reaction class E according to EN 13501-1 |
Compressive stress |
≥120kPa(≥0.12 N/mm2) |
Thermal conductivity (EU) |
0.022 (W/m2.K) |
PIR index |
>250 |
Thickness of the insulation board
16 other products in the same category:
Technical data:
Areas of application
Thermal insulation boards for terraces in a convenient format
Description
Thermal insulation boards for flat roofs with aluminum cover on both sides
Version
Straight boards
Board size
1200 x 600 mm...
18.73€
Tax included
SGN 040 snow hook is suitable for Creaton Terra Optima D
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra...
1.06€
Tax included
Technical data:
Top layer
Mineral mat; with additional diffusion-open waterproofing layer
Bottom surface layer
Mineral mat
Edge plate
Tongue and groove, around the perimeter
Length
1800 mm (outside dimension)1780 mm (inside...
58.58€
Tax included
Ventilation element - for TWR sun tunnel
164.68€
Tax included
SGN 020 snow hook is suitable for Creaton Premion
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
1.06€
Tax included
Technical data:
Areas of application
Large and small areas, convenient format
Description
Thermal insulation for flat roofs, double-sided mineral matting
Version
Straight boards, straight edge (M)Straight boards with tooth (MF)
Board...
21.61€
Tax included
Technical data:
Top layer
Aluminum; with additional waterproofing layer of modified asphalt tape and non-slip overlays
Bottom covering layer
Aluminum
Edge plate
Tongue and groove, around the perimeter
Length
1800 mm (outside...
76.83€
Tax included
Technical data:
Areas of application
Large and small areas, convenient format
Description
Thermal insulation for flat roofs, double-sided mineral matting
Version
Straight boards, straight edge (M)Straight boards with tooth (MF)
Board...
56.66€
Tax included
Technical data:
Areas of application
Large industrial roofs Fast installation
Description
Thermal insulation panels for flat roofsWith aluminum shield on both sides
Version
Straight plates with teeth
Board size
2,400 x 1,200...
33.13€
Tax included
SGN 015 snow hook is suitable for Boegner Innovo 12
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - for an extra...
1.06€
Tax included
SGN 024 snow hook is suitable for Roben Piedmont
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
1.06€
Tax included
Technical data:
Top layer
Aluminum; with textile waterproof top layer
Bottom cover layer
Aluminum
Edge plate
Tongue and groove, around the perimeter
Length
1800 mm (outside dimension)1780 mm (inside dimension)
Width
1,200 mm (outside...
71.98€
Tax included
SGN 035 snow hook is suitable for Tondach Wiener Norma
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with corrosion-resistant polyester paint and available in four different colors (non-standard color - extra charge - min....
1.06€
Tax included