SGN 002 snow hook is suitable for Roben Fleming, Creaton Harmonia, Sirius, Nelskamp Nibra F10U.
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra charge - min. order size and lead time up to 2 weeks).
Our snow hooks are designed to stop masses of snow falling from the roof structure.
Dimensions:
Height of the anti-snow profile: 65 mm
Width: 34 mm (+/- 0.1 mm)
Available colors:
- Brick red RAL 8004
- Brown RAL 8017
- RAL 9005 black
- RAL 7016 gray-black
Installation of snow hooks:
When choosing snow hooks, consider the type of roofing and the type of snow barrier. You should also consider the slope of the roof and calculate the number of elements required. The number of snow barriers depends on the snow load, which can be determined by regional snow load calculations. Below is the recommended number of snow hooks depending on the roof pitch:
- Roof pitch up to 30 degrees: minimum 3 pcs/m².
- Roof pitch up to 35 degrees: minimum 4 pcs/m²
- Roof pitch up to 40 degrees: minimum 5 pieces/m²
- Roof pitch up to 45 degrees: minimum 6 pieces/m²
- Roof pitch up to 50 degrees: minimum 7 pcs/m²
Snow hooks should be installed on the roof structure by knowledgeable professionals, as the safety of people is at stake. Installation is subject to relevant regulations.
Before placing an order, check that the required type and color are in stock. In case of stock shortages, the minimum order quantity is 300 units.
16 other products in the same category:
The SGN 018 snow hook is suitable for the Nelskamp Nibra F7.
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
1.26€
Tax included
SGN 027 snow hook is suitable for Tondach Vineam
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
1.06€
Tax included
SGN 040 snow hook is suitable for Creaton Terra Optima D
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra...
1.06€
Tax included
SGN 024 snow hook is suitable for Roben Piedmont
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
1.06€
Tax included
SGN 015 snow hook is suitable for Boegner Innovo 12
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - for an extra...
1.06€
Tax included
SGN 100 snow hook is suitable for flat roofing materials
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard...
0.97€
Tax included
Protisněhový hák SGN 103 je vhodný pro betonové a keramické střešní tašky
Materiál:
Pozinkovaný ocelový plech o tloušťce 1,2 mm + 0,1 mm natřený polyesterovou barvou, která je odolná proti korozi a je k dispozici ve čtyřech různých barvách...
1.06€
Tax included
Protisněhový hák SGN 004 je vhodný pro Koramic Romanska L25
Materiál:
Pozinkovaný ocelový plech o tloušťce 1,2 mm + 0,1 mm natřený polyesterovou barvou, která je odolná proti korozi a je k dispozici ve čtyřech různých barvách (atypická barva –...
1.06€
Tax included
SGN 005 snow hook is suitable for Tondach Romanska
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
1.06€
Tax included
SGN 101 snow hook is suitable for flat roofs
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard color - at an...
0.97€
Tax included
SGN 001 snow hook is suitable for flat roofing materials
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard...
0.97€
Tax included
SGN 021 snow hook is suitable for Tondach Samba (Rumba).
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
1.06€
Tax included
SGN 031 snow hook is suitable for Nexe Caesar
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra charge -...
1.06€
Tax included
SGN 032 snow hook is suitable for Nelskamp Nibra DS 5
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
1.06€
Tax included
SGN 014 snow hook is suitable for Roben Monza Plus
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
0.97€
Tax included
The SGN 016 snow hook is suitable for the Jungeimer Cosmo
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with corrosion-resistant polyester paint and available in four different colors (non-standard color - at an extra charge...
1.06€
Tax included
en
cs
sk
pl
de
