en
cs
sk
pl
de
hu
es
VENTIA METAL roof membrane with a mat
4.06€
Tax included
The price shown is for 1 meter2
A special diffusion roofing membrane designed for flat sheet metal roofing. Its use protects the sheet against corrosion - from the outside it is covered with a drainage spacer. It is characterized by high strength and very good vapor permeability - Sd=0,02 m. Resistant to UV radiation (durability up to 3 months). Surface weight: about 430 g/m2.
Ventia Metal 430 g/m2 roof membrane
Ventia Metal is a three-layer, highly vapor-permeable roof membrane with a polypropylene spacer mat designed as an insurance waterproofing for insulated pitched roofs under metal roofing laid directly on solid boarding. It perfectly drains moisture from the underside of the roofing while providing a ventilation gap. The basis of the product is a roofing membrane with improved strength parameters, which is not subject to mechanical damage, bringing considerable comfort during installation. The membrane is printed for easy installation. The use of Ventia will extend the life of the roof and attic.
The membrane is available in three versions:
- without self-adhesive strips
- T version, with one self-adhesive strip
- TT version, with two adhesive strips (on request)
Features:
- Weight: 430 g/m2.
- Width: 1.5 m
- Thickness: 7 mm
- Reaction to fire: class F
- Resistance to water penetration: W1
- Water vapor transmission rate
- Sd: 0.03 m
- UV resistance: 3 months
- Can be used on fully boarded roofs: Yes
PAGE
Ventia Metal is installed on a hard, flat, clean and dry substrate. It is laid directly on the boarding so as not to cause the membrane to ripple. The print is directed towards the roofing, i.e. upwards. Installation begins from the bottom of the roof (at the eaves) and proceeds upward (toward the ridge). The overlap of the strips is at least 10 cm, see the imprint on the membrane.
Material:
Polypropylene fibers bonded with polypropylene active film; drainage spacer on the outside.
16 other products in the same category:
Bauder Top TS 40 NSK - asphalt backing tape with self-adhesive connector
Bauder TOP TS 40 NSK The asphalt underlayment tape with self-adhesive joint is designed for laying on wooden formwork or OSB. The tape is distinguished by its low weight while maintaining important properties such as strength and...
4.28€
Tax included
Nortia BLUE TT 160 g/m2 roofing membrane
Nortia BLUE 160 g/m2 TT roof membrane This three-layer, durable and strong film effectively protects the attic and thermal insulation layer from moisture, wind and dust. It helps prevent leaks caused by roofing damage. Ideal for building your...
1.22€
Tax included
VAXO 3XL roof membrane - 180 g/m² (75 m²)
Vaxo 3XL roof membrane Vaxo 3XL membrane is a three-layer roofing membrane made of polypropylene (PP) fabric, which is characterized by high UV resistance (up to seven weeks) and long life. So isn't the Vaxo 3XL roof membrane just what you...
1.48€
Tax included
Ventia Nortia RED MAX 190 g/m2 roofing membrane
Nortia RED MAX TT 190g/m2 roofing membrane. This heavy-duty three-layer membrane protects the attic and thermal insulation layer from moisture, dust and wind, and prevents leakage in case of roofing damage. It is ideal for building your own...
1.84€
Tax included
Ventia Wind Barrier 85 g/m² (75m²)
VENTIA WIND BARRIER VENTIA WIND BARRIER is a key element in protecting a building from heat loss caused by uncontrolled air flow. Thanks to its excellent diffusion properties (Sd=0.005 m), it can be used as an effective insulation for walls of...
0.68€
Tax included
A special diffusion roofing membrane designed for flat sheet metal roofing. Its use protects the sheet against corrosion - from the outside it is covered with a drainage spacer. It is characterized by high strength and very good vapor permeability - Sd=0,02 m. Resistant to UV radiation (durability up to 3 months). Surface weight: about 430 g/m2.