SGN 032 snow hook is suitable for Nelskamp Nibra DS 5
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra charge - min. order size and delivery time up to 2 weeks).
Our snow hooks are designed to stop masses of snow falling from the roof structure.
Dimensions:
Height of the anti-snow profile: 65 mm
Width: 34 mm (+/- 0.1 mm)
Available colors:
- Brick red RAL 8004
- Brown RAL 8017
- RAL 9005 black
- RAL 7016 gray-black
Installation of snow hooks:
When choosing snow hooks, consider the type of roofing and the type of snow barrier. You should also consider the slope of the roof and calculate the number of elements required. The number of snow barriers depends on the snow load, which can be determined by regional snow load calculations. Below is the recommended number of snow hooks depending on the angle of the roof:
- Roof pitch up to 30 degrees: a minimum of 3 pcs/m².
- Roof pitch up to 35 degrees: minimum 4 pcs/m²
- Roof pitch up to 40 degrees: minimum 5 pieces/m²
- Roof pitch up to 45 degrees: minimum 6 pieces/m²
- Roof pitch up to 50 degrees: minimum 7 pcs/m²
Snow hooks should be installed on the roof structure by knowledgeable professionals, as the safety of people is at stake. Installation is subject to relevant regulations.
Before placing an order, check that the required type and color are in stock. In case of stock shortages, the minimum order quantity is 300 units.
16 other products in the same category:
SGN 028 snow hook is suitable for Creaton Balance
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč25.95
Tax included
SGN 020 snow hook is suitable for Creaton Premion
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč25.95
Tax included
SGN 010 snow hook is suitable for Braas Rubin, Creaton-Mz3
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
Kč25.95
Tax included
SGN 035 snow hook is suitable for Tondach Wiener Norma
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with corrosion-resistant polyester paint and available in four different colors (non-standard color - extra charge - min....
Kč25.95
Tax included
The SGN 016 snow hook is suitable for the Jungeimer Cosmo
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with corrosion-resistant polyester paint and available in four different colors (non-standard color - at an extra charge...
Kč25.95
Tax included
SGN 101 snow hook is suitable for flat roofs
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard color - at an...
Kč23.60
Tax included
SGN 021 snow hook is suitable for Tondach Samba (Rumba).
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč25.95
Tax included
SGN 009 snow hook is suitable for Koramic Renaissance L15
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
Kč25.95
Tax included
SGN 023 snow hook is suitable for Creaton Piemon
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard color - at...
Kč25.95
Tax included
SGN 002 snow hook is suitable for Roben Fleming, Creaton Harmonia, Sirius, Nelskamp Nibra F10U.
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different...
Kč25.95
Tax included
SGN 008 snow hook is suitable for Tondach Marseille 14
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč25.95
Tax included
SGN 005 snow hook is suitable for Tondach Romanska
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč25.95
Tax included
SGN 026 snow hook is suitable for Tondach Makedo, Kontinental plus, Brnenka
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard...
Kč25.95
Tax included
SGN 036 snow hook is suitable for Meyer Holsen Vario, Junior Zwilling
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color...
Kč25.95
Tax included
The SGN 034 snow hook is suitable for the Nelskamp F12 SUD
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
Kč25.95
Tax included
SGN 027 snow hook is suitable for Tondach Vineam
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč25.95
Tax included
en
cs
sk
pl
de
