The roof step is mounted on the tops of the sheet metal roof profile. It is suitable for profiles with a maximum spacing of 280 mm. It has two tread surfaces for different roof angles and provides effective friction for shoes. The roof treads can be installed in one direction only, directly behind each other, with a maximum center-to-center spacing of 300 mm. Approved for roofs with a maximum slope of 45° and a maximum facade height of 4 m.
Data sheet
- Reference
|
- CWL.KN.3009
|
- In stock
|
- 13 Items
|
- Použití výrobku
|
- Plechové tašky
Ploché krytiny
Trapézové plechy
|
- Reference
- CWL.KN.3009
- In stock
- 13 Items
- Použití výrobku
- Plechové tašky
Ploché krytiny
Trapézové plechy
16 other products in the same category:
P-type footbridge bracket for wall/fireplace mounting
Used for mounting footbridges directly on the wall. The hanging clip is sure to please the roofer or chimney sweep. The batten allows safe movement on the roof during cleaning and...
Kč9.86
Tax included
S-type beaverboard vertical crossing
The two-piece strut S (standard version) and its extended version SD are used for the installation of chimney crossings and steps on roofs covered with ceramic tiles, concrete tiles and bobber board....
Kč9.86
Tax included
DB/DC type vertical footbridge for burnt concrete roof tiles
The two-piece strut of the chimney bridge support allows it to be installed on roof coverings made of concrete or ceramic tiles. The strut requires the use of additional mounting...
Kč9.86
Tax included
BD 420/20 TYPE footbridge strut.
The one-piece strut is used for the installation of gangways and chimney steps, on roofing sheets (BD - with a foot at the bottom).
Material
Hot-dip galvanized flat profile; offered in natural finish...
Kč4.31
Tax included
Footbridge connector
The roof footbridge connector is used to connect two roof footbridges into longer sections. The installation should be made of two elements at each connection point. The connecting element is made of hot-dip galvanized...
Kč2.15
Tax included
Support for footbridge TYPE BG 380/35
The one-piece strut is used for the installation of footbridges and chimney sweep steps on roof coverings made of sheet metal tiles (BG - with a foot at the top).
Material
Hot-dip galvanized flat...
Kč4.31
Tax included
Standing spacer TYPE BD 400/20
One-piece strut is used for installation of passageways and chimney steps, on roofing sheets (BD - with a foot at the bottom).
Material
Hot-dip galvanized flat profile; offered in natural finish (unpainted)...
Kč4.31
Tax included
Vertical passage made of corrugated sheet KLIK
Universal product - allows the installation of a roof ladder both on roofs covered with prefabricated roof panels (with a snap-on system) and on roofs covered with flat sheets lined with...
Kč17.60
Tax included
Vertical footbridge type D burnt concrete roof tile
The one-piece chimney bridge is designed for easy installation on concrete or clay tile roofs. This strut, labeled D, attaches directly to the same batten to which the tiles are already...
Kč8.21
Tax included
Standing footbridge TYPE BD 350/35
One-piece footbridge is used for installation of chimney crossings and steps, on roofing sheets (BD - with a foot at the bottom).
Material
Hot-dip galvanized flat profile; offered in natural finish...
Kč4.31
Tax included
Climbing platform (net) 40 cm - 300 cm*.
The 250 mm steel climbing platform makes it possible to move safely on the roof. It is especially useful for chimney sweeps. It is mainly used near chimneys or skylights. This product complies with...
Kč6.37
Tax included
U-type vertical deck for flat roofing
This one-piece bracket is designed for installing roof steps and transitions on various types of roofing. Its universal design allows it to be used both on flat roofs covered with shingles or...
Kč4.93
Tax included
BD 460/20 TYPE footbridge strut.
One-piece strut is used for installation of gangways and chimney steps, on sheet metal roofing (BD - with a foot at the bottom).
Material
Hot-dip galvanized flat profile; offered in natural finish...
Kč4.31
Tax included
Standing footbridge TYPE BD 350/20
One-piece footbridge is used for installation of passageways and chimney sweep steps, on roofing sheets (BD - with a foot at the bottom).
Material
Hot-dip galvanized flat profile; offered in natural...
Kč4.31
Tax included
L-type vertical footbridge for burnt concrete roof tiles
The strut of the chimney bridge support allows its installation on roof coverings made of concrete or ceramic tiles. The L strut is screwed to an additional mounting batten. It is...
Kč8.21
Tax included
Footbridge cradle
The footbridge cradle is used to mount the platform on the roof. You will also need vertical struts to install the platform. This product meets the requirements of the European standard EN 516. It is made of hot-dip...
Kč4.03
Tax included
en
cs
sk
pl
de
hu
es
