Chimney sweep benches and steps There are 38 products.

Roof bench, seam panel sheet - kit

Chimney sweep bench for panel seam set Introducing a steel chimney sweep bench designed specifically for tin roofs made of panel seam type with a lock height of up to 32 mm. Thanks to special consoles, the installation of this bench is possible...

CWL roof step - profiled metal roofs

The roof step is mounted on the tops of the sheet metal roof profile. It is suitable for profiles with a maximum spacing of 280 mm. It has two tread surfaces for different roof angles and provides effective friction for shoes. The roof treads...

Chimney sweep bench, roof platform

Climbing platform (net) 40 cm - 300 cm*. The 250 mm steel climbing platform makes it possible to move safely on the roof. It is especially useful for chimney sweeps. It is mainly used near chimneys or skylights. This product complies with...

Roof bench cradle, chimney sweep

Footbridge cradle The footbridge cradle is used to mount the platform on the roof. You will also need vertical struts to install the platform. This product meets the requirements of the European standard EN 516. It is made of hot-dip...

Roof bench bracket TYPE BD 350/35, metal roofing sheet

Standing footbridge TYPE BD 350/35 One-piece footbridge is used for installation of chimney crossings and steps, on roofing sheets (BD - with a foot at the bottom). Material Hot-dip galvanized flat profile; offered in natural finish...

Chimney bench bracket type FALZ, standing seam

Vertical passage made of corrugated sheet KLIK Universal product - allows the installation of a roof ladder both on roofs covered with prefabricated roof panels (with a snap-on system) and on roofs covered with flat sheets lined with...

Roof bench bracket type P for mounting on wall, chimney

P-type footbridge bracket for wall/fireplace mounting Used for mounting footbridges directly on the wall. The hanging clip is sure to please the roofer or chimney sweep. The batten allows safe movement on the roof during cleaning and...

Chimney bench bracket TYPE BD 350/20

Standing footbridge TYPE BD 350/20 One-piece footbridge is used for installation of passageways and chimney sweep steps, on roofing sheets (BD - with a foot at the bottom). Material Hot-dip galvanized flat profile; offered in natural...

Chimney bench sheet metal type BD 350/35, complete set

BENT BD 350/35 chimney sweep bench - complete set*. A complete chimney sweep bench from 40 or 80 cm in length. The kit includes all the components needed for installation: roof platform, screws and brackets for metal roofing with a profile...

Chimney bench sheet metal type BD 350/30, complete set

BENT BD 350/30 chimney sweep bench - complete set*. A complete chimney sweep bench from 40 or 80 cm in length. The kit includes all the components needed for installation: roof platform, screws and brackets for metal roofing with a profile...

Chimney bench sheet metal type BD 350/20, complete set

BENT BD 350/20 chimney sweep bench - complete set*. A complete chimney sweep bench from 40 or 80 cm in length. The kit includes all the components needed for installation: roof platform, screws and brackets for metal roofing with a profile...

Chimney bench bracket TYPE BG 380/35

Support for footbridge TYPE BG 380/35 The one-piece strut is used for the installation of footbridges and chimney sweep steps on roof coverings made of sheet metal tiles (BG - with a foot at the top). Material Hot-dip galvanized flat...

Chimney bench bracket TYPE BD 460/20

BD 460/20 TYPE footbridge strut. One-piece strut is used for installation of gangways and chimney steps, on sheet metal roofing (BD - with a foot at the bottom). Material Hot-dip galvanized flat profile; offered in natural finish...

Chimney bench bracket TYPE BD 420/20

BD 420/20 TYPE footbridge strut. The one-piece strut is used for the installation of gangways and chimney steps, on roofing sheets (BD - with a foot at the bottom). Material Hot-dip galvanized flat profile; offered in natural finish...

Chimney bench bracket type BD 350/30

TYPE BD 350/30 vertical strut One-piece strut is used for installation of chimney crossings and steps, on roofing sheets (BD - with a foot at the bottom). Material Hot-dip galvanized flat profile; offered in natural finish (unpainted) or...

Chimney bench bracket for seam roofs from 20° to 50° TYPE A

Vertical transition from 20° to 50° - TYPE A Nortia BENT: Aluminum chimney bench struts designed for roofs with professional grooved (corrugated) roofing with an angle of 20° to 50° - TYPE A Aluminum chimney bench struts Nortia BENT:...

Chimney bench bracket for seam roofs from 20° to 50° TYPE A from 5° to 30° TYPE N

Vertical transition from 5° to 30° TYPE N Nortia BENT: Aluminum chimney bench struts for professional roofs with pitches from 5° to 30° - TYPE N Aluminum chimney bench struts Nortia BENT: Features: TYPE N chimney sweep benches are...

Copper chimney sweep bench - standing seam coverings

Chimney sweep bench aluminum platform

Aluminum climbing platform Nortia BENT introduces aluminum platforms designed specifically for installation on standing seam metal roofing. The platforms are made of 3 mm thick 6060T6 aluminum, a self-hardening alloy with excellent...

Chimney bench bracket type P - chimney, wall

P-passage for wall and chimney included* Complete chimney passage with a length of 40 to 200 cm. The kit includes all the components necessary for installation: the passage, screws and two brackets for mounting on the wall or chimney. Kit...

Chimney sweep bench type U - universal, set

BD 350/20 transition module - complete set* Complete chimney bridge in lengths from 40 to 200 cm. The kit includes all necessary components for installation: the gangway, screws, fasteners and beams for flat roofing materials such as...

Roof bench, chimney sweep - standing seam

KLIK foldingroof passageway - complete set*. A complete chimney sweep platform with a length of 40 to 200 cm is a universal product that allows installation both on roofs covered with prefabricated roof panels with a snap-on system and on...

BD 460/20 sheet metal chimney bench

BD 460/20 transition module - complete set* Complete chimney bridge with a length of 40 to 200 cm. The kit includes all the components needed for installation: the platform, screws, brackets and supports for sheet metal with a profile of...

Chimney sweep bench type BD 420/20, set

BD 420/20 transition module - complete set* Complete chimney bridge with a length of 40 to 200 cm. The kit contains all the components needed for installation: the platform, screws, brackets and supports for sheet metal with a profile of...