SGN 103 snow hook is suitable for concrete and ceramic roof tiles
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard color - at an extra charge - min. order size and lead time up to 2 weeks).
Our snow hooks are designed to stop masses of snow falling from the roof structure.
Dimensions:
Height of the anti-snow profile: 65 mm
Width: 34 mm (+/- 0.1 mm)
Available colors:
- Brick red RAL 8004
- Brown RAL 8017
- RAL 9005 black
- RAL 7016 gray-black
Installation of snow hooks:
When choosing snow hooks, consider the type of roofing and the type of snow barrier. You should also consider the slope of the roof and calculate the number of elements required. The number of snow barriers depends on the snow load, which can be determined by regional snow load calculations. Below is the recommended number of snow hooks depending on the roof pitch:
- Roof pitch up to 30 degrees: minimum 3 pcs/m².
- Roof pitch up to 35 degrees: minimum 4 pcs/m²
- Roof pitch up to 40 degrees: minimum 5 pieces/m²
- Roof pitch up to 45 degrees: minimum 6 pieces/m²
- Roof pitch up to 50 degrees: minimum 7 pcs/m²
Snow hooks should be installed on the roof structure by knowledgeable professionals, as the safety of people is at stake. Installation is subject to relevant regulations.
Before placing an order, check that the required type and color are in stock. In case of stock shortages, the minimum order quantity is 300 units.
16 other products in the same category:
SGN 014 snow hook is suitable for Roben Monza Plus
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč0.94
Tax included
SGN 011 snow hook is suitable for Creaton Futura
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč1.03
Tax included
The SGN 016 snow hook is suitable for the Jungeimer Cosmo
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with corrosion-resistant polyester paint and available in four different colors (non-standard color - at an extra charge...
Kč1.03
Tax included
SGN 027 snow hook is suitable for Tondach Vineam
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč1.03
Tax included
SGN 040 snow hook is suitable for Creaton Terra Optima D
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra...
Kč1.03
Tax included
SGN 013 snow hook is suitable for Tondach Polka, Jirčanka
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - for an...
Kč1.03
Tax included
SGN 100 snow hook is suitable for flat roofing materials
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard...
Kč0.94
Tax included
The SGN 018 snow hook is suitable for the Nelskamp Nibra F7.
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
Kč1.22
Tax included
SGN 037 snow hook is suitable for Creaton Titania
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč0.94
Tax included
SGN 008 snow hook is suitable for Tondach Marseille 14
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč1.03
Tax included
SGN 023 snow hook is suitable for Creaton Piemon
Material:
Galvanized steel sheet with a thickness of 1.2 mm + 0.1 mm painted with polyester paint, which is resistant to corrosion and available in four different colors (non-standard color - at...
Kč1.03
Tax included
SGN 002 snow hook is suitable for Roben Fleming, Creaton Harmonia, Sirius, Nelskamp Nibra F10U.
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different...
Kč1.03
Tax included
SGN 032 snow hook is suitable for Nelskamp Nibra DS 5
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč1.03
Tax included
SGN 012 snow hook is suitable for Erlus E58/E58 MAX
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick, painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - extra charge -...
Kč0.94
Tax included
SGN 021 snow hook is suitable for Tondach Samba (Rumba).
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an extra...
Kč0.98
Kč1.03
-5%
Tax included
The SGN 034 snow hook is suitable for the Nelskamp F12 SUD
Material:
Galvanized steel sheet 1.2 mm + 0.1 mm thick painted with polyester paint, which is corrosion resistant and available in four different colors (non-standard color - at an...
Kč1.03
Tax included
en
cs
sk
pl
de
hu
es
