Snow barrier bracket type FALZ for ladders with a height of 155 mm
The "Falz" snow barrier bracket is designed to allow the safe and stable installation of snow barriers on roofing made of flat sheets connected "standing seam". This product is ideal for use in areas where it is necessary to prevent snow from sliding off the roof, which can pose a danger to people or property under the roof.
The bracket consists of three parts connected by screws, which ensures the strength and stability of the entire structure. The materials used in production are resistant to corrosion and weather conditions, which prolongs the life of the product and ensures its reliability even in harsh conditions.
Variants:
The product is available in two versions to suit different types of roofing:
- For low groove: This version is designed for sheets with a low groove profile of 28 mm or less.
- For high groove: This version is suitable for sheets with a high groove profile of 38 mm max.
Material
Hot-dip galvanized steel profile; available in natural (unpainted) or powder-coated finish. Window sill in non-standard colors available on request (at extra cost, delivery time up to 7 days).
Dimensions
- Length: 260 mm
- Width: 200 mm
Installation on all types of roofing materials
Our snow fences can be mounted on any type of roofing. With our wide range of products, we have a product that can be mounted on any type of roofing. No matter what material your roof is made of, we can provide the right solution for your needs. Snow fences provide safety and protect your roof from snow and ice damage. We offer a variety of models and colors to match the look of your roof. Snow fences are available in two heights: 155 mm and 200 mm.
Zinc coating
All elements are made of steel that has undergone a tinning process. This is the most effective and durable way to protect steel from corrosion. During the tinning process, zinc atoms penetrate the outer layer of the steel, forming a surface alloy of iron and zinc, which forms a protective layer against corrosion. The durability of zinc coatings can reach up to 100 years, depending on conditions.
Powder coating
Powder coating is resistant to corrosion, chemicals, high temperatures and mechanical damage. Electrically charged powder paint particles are applied to the metal surface, which is then heated to 140-200°C, causing the powder to melt and polymerize. The advantages of powder coating include a smooth, crack- and stain-free surface, anti-corrosion properties, resistance to mechanical damage, thermal and chemical resistance, and environmental friendliness.
Snow balustrade: and the number of handles needed
What does the number of handles depend on?
- The slope of the roof (the steeper the slope, the more handles)
- the length of the roof surface (rafters) - above 6 m, an increase in the number of handles or even the installation of a second row of railings is required
- for standard lengths of rafters, the number of handles is used according to the table below
Note - exceptions!
- When the roof pitch exceeds 55° - always add one bracket to the set.
- When the length of the rafters exceeds 6 m, it is necessary to add 1 bracket for every 2 m of rafters above 7 m. Thus, from 6 m to 8 m - one additional bracket, from 8 m to 10 m - two additional brackets.
- Above 10 m, it is necessary to use an additional row of handrails - about 4 m above the first row. In this case, the lower handrail is installed according to the table above, and the upper handrail according to point 2
- In the case of handrails with a height of 20 cm, an additional bracket should be used.
Note: The above information is the result of collected information and our experience. The above information should not be considered as installation instructions. The use of roof communication should be in accordance with the technical design drawn up for the building, taking into account the requirements of relevant standards and applicable technical and construction regulations. To add additional brackets to the kit, use the menu of individual components.
| Roof pitch angle |
Length of the railing |
Number of brackets per 1 grille |
| Up to 25 degrees |
1,00 m |
2 |
| 25 - 40 degrees |
1,50 m |
3 |
| 2,00 m |
4 |
| Above 40 degrees |
1,00 m |
3 |
| 1,50 m |
4 |
| 2,00 m |
5 |
Protective coating - standard colors available:* * Color availability may vary depending on product
General assembly rules
The method of mounting the handrail to the bracket:
Special slats on the bracket allow quick and easy installation of the snow railing. Simply push the handrail profile into the latches - the new method of attaching the handrail to the latch brackets is extremely durable. No additional tools are needed.
Handrail mounting height:
When installed, the handrail is 65 mm above the base of the latch. For coverings with a module height exceeding 65 mm, installation will not be possible. This applies in particular to:
- metal sheets with a wave height <65 mm
- trapezoidal sheets with a module <65 mm (T-65 profile)
- corrugated sheets with a wave height <65 mm.
Instructions for installation of snow protection:
- Snow guard brackets should be fixed to the wooden roof structure with wood screws in accordance with PN-EN 14592+A1:2012.
- The recommended mounting point for the first row of rails is at the height of the roof trusses
- Edge brackets should be installed so that they are close to the edge of the railing.
Note: The spacing of the brackets, the number of fixing screws and their dimensions should be determined in the technical design, depending on the slope of the roof and the snow load zone, taking into account the load capacity of the elements of about 2 kN.
Screws 6 mm x 60 mm for attaching fasteners to the roof surface can be found here: Screws for attachment of snow guard
Need help ordering? Contact us, we can help!
Data sheet
- Reference
|
- MRI15.VZP.FALZ.8017
|
- Použití výrobku
|
- Falcované krytiny
|
- Výška mřížek
|
- 155 mm
|
- Reference
- MRI15.VZP.FALZ.8017
- Použití výrobku
- Falcované krytiny
- Výška mřížek
- 155 mm
14 other products in the same category:
Vzpěra protisněhové mříže 155 typ BG 350/20
Vzpěra sněhové zábrany na šikmou střechu pokrytou plechovými taškami s délkou modulu 350 mm a výškou prolisu 20 mm pro sněhovou zábranu o výšce 15 cm. Držák je vyroben z ocelového plechu šířky 40...
Kč130.56
Tax included
Snow barrier post 155 type BD 350/20
Snow barrier bracket for sloping tiled roofs with a module length of 350 mm and a clearance height of 20 mm for a 15 cm high snow barrier. The bracket is made of steel sheet 40 mm wide and 4 mm thick. It...
Kč130.56
Tax included
The strut is suitable for direct installation on roofing. The profiled base determines the use of the product for installation on battens under concrete or plain tile roofing on felt roofing.
To ensure safe installation, attention should be...
Kč137.64
Tax included
Vertical snow fence strut type DB/DC for ladders with a height of 200 mm.
The "DB/DC" snow fence strut is a key component for installing a snow fence on concrete or ceramic tongue-and-groove tile roofs. This product is designed to ensure a...
Kč137.64
Tax included
Type D snow fence strut for ladders with a height of 200 mm
The "D" snow fence strut is a key component of snow fence installation on concrete or ceramic tongue-and-groove tile roofs. This product is designed to provide a solid and secure...
Kč137.64
Tax included
Snow barrier connector
The snow barrier connector is a key component of the snow barrier system on roofs. This connector allows several grilles to be connected together to form a continuous protective line. These longer rows of grilles...
Kč23.60
Tax included
Snow ladder 155 mm
The snow grille is a key component of the roof snow protection system, which is designed to prevent snow from sliding off, thereby protecting the building's surroundings. This grating is an effective protection against...
Kč383.03
Tax included
The strut is suitable for installation on various types of concrete tiles and fired tiles of greater thickness.
Dimensions (L x W): 505 x 40 mm, thickness 4 mm
Weight: 1.2 kg
Kč160.45
Tax included
The strut is suitable for direct installation on roofing. The profiled base determines the use of the product for installation on battens under concrete or plain tile roofing on felt roofing.
To ensure safe installation, attention should be...
Kč137.64
Tax included
Vertical snow fence strut type DB/DC for ladders with a height of 155 mm.
The "DB/DC" snow fence strut is a key component for installing a snow fence on concrete or ceramic tongue-and-groove tile roofs. This product is designed to ensure a...
Kč130.56
Tax included
Protisněhová mříž/žebříček zachytávače 200 mm
Protisněhová mříž je klíčovým prvkem systému ochrany proti sněhu na střechách, který má za úkol zamezit sklouzávání sněhu a tím chránit okolí budovy. Tato mříž je efektivní ochranou proti...
Kč624.48
Tax included
S-type snow fence strut for ladders with a height of 155 mm
The strut is an element used for the installation of snow fence on roofing made of ceramic tiles and is offered in two versions: smooth for tiles laid "in scales" and long for...
Kč130.56
Tax included
Type D snow fence strut for ladders with a height of 155 mm
The "D" snow fence strut is a key component of snow fence installation on concrete or ceramic tongue-and-groove tile roofs. This product is designed to provide a solid and secure...
Kč160.45
Tax included
Snow fence beam bracket 155 type U
The universal snow fence strut is designed for installation on various types of roofing, including flat, shingle and trapezoidal sheet roofs. The bracket is made of steel sheet 40 mm wide and 4 mm thick,...
Kč130.56
Tax included
en
cs
sk
pl
de
.png)
